To run the pairing software, go first lớn the control Panel và click công nghệ bluetooth Configuration.

*

Again, make sure that bluetooth không dây is enabled; right-click on the bluetooth icon in the system tray, và if it isn’t enabled, click to enable.

Clicking on bluetooth Configuration will start a Wizard. Make sure your giasuviet.edu.vn is on, & you have heard the triple-beep. Then click Next.

*

The next dialog will show any bluetooth không dây devices within range. The mặc định setting is „show all devices”; it is safest to lớn leave this at this setting, lớn make sure that the software can discover the giasuviet.edu.vn.

*

Once the giasuviet.edu.vn has been discovered, the tìm kiếm will stop, & you will see the giasuviet.edu.vn in the window.

*

Select it and click Next.

The following dialog appears khổng lồ be asking for a passcode or security code. However, if you don’t want lớn set one up for your giasuviet.edu.vn, click Skip, và the software will try to pair with the device without using a code. If the pairing fails at this step, the following notes could be of help.

*

Special chú ý for potential problems with the Broadcom WIDCOMM drivers:

Occasionally these drivers can cause communication problems between your device and the giasuviet.edu.vn, because their inbuilt security prevents the connection from operating properly. Lớn correct this, there are two steps khổng lồ take.

When you are configuring the driver, the software is mix by default to ask for a security PIN. You need to lớn turn this feature off. In công nghệ bluetooth không dây Places on your computer, click on the Window thực đơn „Bluetooth Interface” & select the function „Advanced Configuration”. After the window appears, choose „Local Services” và double-click on the thành phầm „Bluetooth Serial Port”. Turn off the „Connect Safely” setting.

*

Then, in the same window, on the tab „Client applications”, select „Bluetooth Serial Port Interface” & disable the „Secure connection”. After you have completed the configuration your connection between the device và giasuviet.edu.vn will operate correctly.

*

*

After the pairing takes place, the service discovery is done, và you are asked to lớn select a service and, optionally, configure it. If you don’t select and place a check next lớn a service in this step, no services will be activated – so although giasuviet.edu.vn and your PC or netbook will be paired, you won’t be able to do anything with the connection. For the giasuviet.edu.vn, the only service available is Serial Port; select it và make sure the checkbox is checked, & then click Next.

A shortcut will be placed on the desktop, and then the final screen of the Wizard appears. Click Finish.

*

There is still one last step; the pairing is done, but you have still lớn connect. Go khổng lồ the desktop & double-click on My bluetooth không dây Places, which the Wizard has just put there. You will find your giasuviet.edu.vn Serial Port service in the window that opens.

*

Make sure that your giasuviet.edu.vn is on and Bluetooth is active; then right-click on the giasuviet.edu.vn Serial Port icon & click Connect. Connections made after this should be automatic.